2 Piece Retrofit Pipe Flashing, Split Pipe Boot for Pipes 1″ to 5″ (Bulk, Box of 24 Sets)

Price range: $2,156.40 through $18,684.00

American made 2 piece retrofit pipe flashing for round pipes 1″ to 5″. It goes around wire masts, high efficiency appliance stacks and other obstacles where a regular boot won’t slide over. No clips, no tearing off shingles, and it looks like new construction when it’s done.

Sold by the box (24 sets per box), 3 box minimum. Free shipping. The more you buy, the cheaper each set gets.

Retrofit pipe flashing for the pipes a regular boot won’t fit

Installation Guide
2 piece pipe flashing made in Toledo, Ohio. It splits and wraps around the pipe instead of sliding over the top, so you can flash a pipe without cutting it, pulling wires or tearing up shingles.

Use it for:

  • Electrical masts and wire masts
  • Concentric pipes and high efficiency appliance stacks
  • Knuckled stacks and irregular pipes
  • Repairs. Put it right over an old or broken flashing, no mismatched shingles needed

Why guys put it on the truck

  • Installs in under 60 seconds (manufacturer rating)
  • No clips needed
  • Seals round pipes from 1″ to 5″
  • Rigid UV resistant base with a UV resistant TPE collar
  • Holds up in extreme temperatures and doesn’t crack or lift with weathering
  • Clean, new construction look on the roof

Specs

  • Pipe size: round pipes 1″ to 5″ diameter (trim the tear away ribs to fit)
  • Roof type: shingle roofs, 3/12 pitch and steeper
  • Installed footprint: 16 1/4″ tall by 12″ wide
  • Material: UV resistant co-polymer base, UV resistant TPE collar
  • Color: black
  • Each set: 1 upper and 1 lower, about 1 lb per set
  • Made in: Toledo, Ohio, USA

How it goes on

  1. Shingle up to the pipe first. If decking allows, lay ice and water shield at least 6″ past the flashing footprint.
  2. Pick the lower piece. Choose a rib smaller than your pipe and carefully trim inside it.
  3. Lube the pipe, snug the lower piece down and fasten it.
  4. Apply sealant.
  5. Fasten the upper piece. Lower goes first, upper goes second so water runs off right.
  6. Shingle as usual. Nick the shingles like you would at a valley, and don’t butt them tight against the cone.

Use a sealant that works with TPE and co-polymer including Geocel 4600, Henry 900 and Bostik Pro-MS 50.

Pricing and ordering

This is a bulk listing. A box is 24 sets and the minimum order is 3 boxes (72 sets). Shipping is free. Price per set drops as you go up.

OrderSetsPrice per setPrice per boxOrder total
3 boxes72$29.95$718.80$2,156.40
6 boxes144$28.95$694.80$4,168.80
12 boxes288$27.95$670.80$8,049.60
Pallet576$25.95$622.80$14,947.20
Pallet720$25.95$622.80$18,684.00

Pallet orders ship freight. If you need a liftgate truck for delivery, add the liftgate option at checkout.

QTY

3 Boxes (72 Sets), 6 Boxes (144 Sets), 12 Boxes (288 Sets), Pallet (576 Sets), Pallet (720 Sets)